Lincoln 2010 Navigator Bedienungsanleitung PDF herunterladen (Seite 143)

• activate or deactivate the Autolock feature if equipped

• release the liftgate glass,

The keypad can be operated with the factory set 5–digit entry code; this

code is located on the owner’s wallet card in the glove box and is

available from your authorized dealer. You can also create your own

5–digit personal entry code.

When pressing the controls on the keyless entry keypad, press the

middle of the controls to ensure a good activation.

Programming your own personal entry code

To create your own personal entry code:

1. Enter the factory set code.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5–digit code.

Each number must be entered

within five seconds of each other.

4. Three unique personal entry

codes can be stored:

• Pressing 1 • 2 assigns driver 1 settings.

• Pressing 3 • 4 assigns driver 2 settings.

• Pressing 5 • 6, 7 • 8, or 9 • 0 assigns Driver 3 settings.

5. The doors will again lock then unlock to confirm that your personal

entry code has been programmed to the module.

• Do not use five numbers in sequential order.

• The factory set code will work even if you have set your own personal

code.

Erasing personal code

1. Enter the factory set 5–digit code.

2. Within five seconds, press the 1 • 2 on the keypad and release.

3. Press and hold the 1 • 2 for two seconds. This must be done within

five seconds of completing Step 2.

Your personal code is now erased and only the factory set 5–digit code

will work.

Anti-scan feature

If the wrong code has been entered seven times (35 consecutive button

presses), the keypad will go into an anti-scan mode. This mode disables

the keypad for one minute and the keypad lamp will flash.

Locks and Security

143

2010 Navigator (nav)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 384 385

Keine Kommentare

Lincoln 2010 Navigator Bedienungsanleitung Seite 143