Lincoln 2010 Navigator Bedienungsanleitung PDF herunterladen (Seite 96)

100

101

Replacing the high-mount brakelamp

To change the high-mount

brakelamp bulbs:

1. Remove the two screws holding

the lamp assembly in place.

2. Pull the lamp assembly straight

out.

3. Disconnect the wire harness.

4. Press the four tabs that hold the

light assembly on, one at a time, and

pull the black bulb carrier away

from the lamp.

5. Pull the old bulb out and replace

with the new bulb.

6. Snap the black bulb carrier into

the lamp assembly.

7. Connect the wire harness.

8. Install the lamp assembly with

two screws.

Replacing license plate lamp bulb

The license plate bulbs are located in the license plate housing assembly

on the liftgate. To change the license plate bulbs:

1. Make sure the headlamp switch is

in the off position.

2. Remove the license lamp screw

from the assembly.

3. Pull the lamp down and twist the

bulb socket counterclockwise.

Remove the bulb socket from the

lamp.

4. Pull out the old bulb and push in

the new bulb.

5. Install the bulb socket in the lamp assembly by turning it clockwise.

6. Install the lamp assembly and secure it with the retaining screw.

Replacing approach lamp/mirror turn signal bulbs

For bulb replacement, see your authorized dealer.

Lights

2010 Navigator (nav)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 384 385

Kommentare zu diesen Handbüchern

Keine Kommentare

Lincoln 2010 Navigator Bedienungsanleitung Seite 96

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Lincoln 2010 Navigator