Lincoln 2010 Navigator Bedienungsanleitung PDF herunterladen (Seite 249)

2. To reinstall the cover, insert the

four plastic tabs on top of the cover

into the corresponding slots, as

shown in the illustration and push

the cover up into the bumper trim.

3. Hold the cover against the bumper trim and reinstall the two

⁄

-turn

fasteners by turning them clockwise.

Preparing to tow

Use the proper equipment for towing a trailer and make sure it is

properly attached to your vehicle. Contact your authorized dealer or a

reliable trailer dealer as soon as possible if you require assistance.

Hitches

Do not use hitches that clamp onto the vehicle bumper. Use a load

carrying hitch. You must distribute the load in your trailer so that

10%–15% of the total weight of the trailer is on the tongue.

WARNING: The trailer hitch on this vehicle is part of the

vehicle rear crash safety structure. Do not remove the trailer

hitch. Failure to follow this warning could compromise vehicle crash

structure and increase the risk of injury in a rear end collision.

Weight distributing hitch

When hooking up a trailer using a load equalizing hitch, always use the

following procedure:

1. Park the unloaded vehicle on a level surface. With the ignition in the

ON position and all doors closed, allow the vehicle to stand (without

passengers) for several minutes so that it can level.

2. Turn the air suspension (if equipped) control to off.

3. Measure the height of a reference point on the front and rear bumpers

at the center of the vehicle.

Tires, Wheels and Loading

249

2010 Navigator (nav)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 384 385

Keine Kommentare

Lincoln 2010 Navigator Bedienungsanleitung Seite 249