Lincoln 2010 Navigator Bedienungsanleitung PDF herunterladen (Seite 89)

100

101

• (1) 8 feet (2.4 meters)

• (2) Center height of lamp to

ground

• (3) 25 feet (7.6 meters)

• (4) Horizontal reference line

2. Measure the height from the

center of your headlamp (indicated

by a 3.0 mm circle on the lens) to

the ground and mark an 8 foot

(2.4 meter) horizontal reference line

on the vertical wall or screen at this height (a piece of masking tape

works well).

3. Turn on the low beam headlamps to illuminate the wall or screen and

open the hood. Cover one of the headlamps so no light from that lamp

hits the wall.

4. On the wall or screen you will

observe a light pattern with a

distinct horizontal edge towards the

right. If this edge is not at the

horizontal reference line, the beam will need to be adjusted so the edge

is at the same height as the horizontal reference line.

5. Locate the vertical adjuster on

each headlamp, then use a Phillips

#2 screwdriver to turn the adjuster

either counterclockwise (to adjust

down) or clockwise (to adjust up)

aligning the upper edge of the light

pattern up to the horizontal line.

6. HORIZONTAL AIM IS NOT

REQUIRED FOR THIS VEHICLE

AND IS NON-ADJUSTABLE.

7. Repeat Steps 3–5 for the other headlamp.

8. Close the hood and turn off the lamps.

Lights

2010 Navigator (nav)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 384 385

Kommentare zu diesen Handbüchern

Keine Kommentare

Lincoln 2010 Navigator Bedienungsanleitung Seite 89

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Lincoln 2010 Navigator